2012 Mitsubishi Outlander Sport Recalls & Complaints

MMNA will notify owners, and dealers will inspect the front cross members. Depending on the level of existing corrosion, either a sealing/anti-corrosion agent will be applied or the front cross member will be replaced with a new one. These repairs will be performed free of charge. The recall began August 7, 2020. Owners may contact MMNA customer service at 1-888-648-7820. MMNA's number for this recall is SR-20-003.

Mitsubishi Motors North America, Inc. (MMNA) is recalling certain 2008-2010 Lancer, 2009-2010 Lancer Sportback, 2008-2013 Outlander, and 2011-2016 Outlander Sport vehicles originally sold in, or ever registered in, Connecticut, Delaware, the District of Columbia, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, and Wisconsin. The front lower control arms may detach due to the front cross member corroding from salt water exposure such as from road salt use.

MMNA will notify owners, and dealers will replace the rod of the wiper link and the wiper motor crank arm, free of charge. The recall is expected to begin April 10, 2018. Owners may contact MMNA customer service at 1-888-648-7820. MMNA's number for this recall is SR-18-004.

Mitsubishi Motors North America, Inc. (MMNA) is recalling certain 2011-2016 Outlander Sport vehicles. Water may enter between the hood and windshield and cause the front wiper link ball joint to corrode, possibly resulting in the wiper link separating and the wipers becoming inoperative.

MMNA will notify owners, and dealers will replace the lift gate supports, free of charge. The recall began on January 20, 2017. Owners may contact MMNA customer service at 1-888-648-7820. MMNA's number for this recall is SR-16-011.

Mitsubishi Motors North America, Inc. (MMNA) is recalling certain model year 2011-2012 Outlander Sport vehicles manufactured August 26, 2010, to June 1, 2012, and 2016 Outlander Sport vehicles manufactured January 11, 2016, to July 8, 2016. The lift gate support outer tube on the affected vehicles may have insufficient anti-corrosion treatment that can allow the outer tube to corrode due to salt and water penetration.

MMNA will notify owners, and dealers will replace the belt tensioner with one that has an improved shape, free of charge. The recall is expected to begin March 27, 2018. Owners may contact MMNA customer service at 1-888-648-7820. MMNA's number for this recall is SR-18-001.

Mitsubishi Motors North America, Inc. (MMNA) is recalling certain 2009-2012 Lancer, 2008-2012 Outlander, 2010-2012 Lancer Sportback, and 2011-2012 Outlander Sport vehicles equipped with either a 4B11 or 4B12 engine. The drive belt automatic tensioner flange may crack, allowing the accessory drive belt to detach.

MMNA will notify owners, and dealers will replace the wiper motor, free of charge. The manufacturer has begun the recall, but parts are not yet available; a second notice will be sent when parts are available. Owners may contact MMNA customer service at 1-888-648-7820. MMNA's number for this recall is SR-16-010.

Mitsubishi Motors North America, Inc. (MMNA) is recalling certain model year 2011-2015 Outlander Sport vehicles manufactured August 26, 2010, to January 5, 2015. In the affected vehicles, water may drop between the hood and the windshield and leak into the wiper motor breathing hole. The water may cause internal corrosion of the windshield wiper motor and the possible failure of the motor.

DEALERS WILL INSPECT THE TURN SIGNAL LEVER AND REPLACE IT WITH A NEW ONE FREE OF CHARGE. NO VEHICLES HAVE BEEN RETAILED TO CUSTOMERS WITH THIS POTENTIAL CONDITION, NO RECALL BULLETIN OR OWNER LETTERS WILL BE PREPARED. YOU MAY CONTACT MITSUBISHI AT 1-800-222-0037.

MITSUBISHI IS RECALLING CERTAIN MODEL YEAR 2012 OUTLANDER SPORT VEHICLES, MANUFACTURED FROM NOVEMBER 9, 2011, THROUGH DECEMBER 16, 2011. THESE VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THE TURN SIGNAL LEVERS IN THE VEHICLE WERE NOT MANUFACTURED CORRECTLY, WHICH COULD RESULT IN THE AUTO-CANCEL FUNCTION OF THE TURN SIGNAL BECOMING INOPERATIVE.