2017 Freightliner Cascadia Recalls & Complaints

Dealers will install a foam grommet, cut a 4-inch access hole into the inner fender, and add a warning label on both fenders, free of charge. Owner notification letters were mailed on July 9, 2021. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-887.

Daimler Trucks North America, LLC (DTNA) is recalling certain 2017-2022 Freightliner Cascadia vehicles equipped with halogen headlight assemblies. The halogen headlight bulb may dislodge during replacement and contact other vehicle components, possibly causing them to melt.

DTNA will notify owners, and dealers will verify that the upper steering shaft pinch bolt is properly tightened, free of charge. The recall began on October 26, 2017. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-748. Note: Owners are advised not to drive their vehicles until they have been checked.

Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2018 Freightliner Cascadia vehicles. The upper steering pinch bolt may not have been properly tightened, possibly causing a loss of mechanical connection between the steering wheel and front wheels.

Cummins will notify owners, and Cummins dealers will install a new ECM, and correct ECM calibrations, free of charge. The recall began on July 8, 2016. Owners may contact DTNA customer service at 1-800-547-0712, or Cummins customer service at 1-800-343-7357. DTNA's number for this recall is FL-715.

Daimler Trucks North America LLC (DTNA) is recalling certain model year 2017 Freightliner Cascadia, 122SD, Western Star 4900SA and 4900FA, and FCCC XCM and XCP trucks manufactured from March 14, 2016, through May 18, 2016, equipped with a Cummins ISX12 or ISX15 engine using certain engine control modules (ECM). These ECM's may experience an internal electrical short that can cause a fuse to blow, resulting in an unexpected engine stall without the ability to restart the engine.

DTNA will notify owners, and dealers will relocate the PDM, free of charge. An interim notice was mailed to owners on November 7, 2016. The recall began on March 3, 2017. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-721.

Daimler Trucks North America, LLC. (DTNA) is recalling certain model year 2013-2017 Freightliner Cascadia vehicles manufactured September 24, 2012, to May 27, 2015 and equipped with compressed natural gas (CNG) engines. The affected vehicles have a Power Distribution Module (PDM) that is mounted near the CNG fuel tank. Due to its location, the PDM may be sprayed with water and contaminants from the road, possibly causing the PDM to short circuit.

DTNA will notify owners, and instruct them to contact Kidde for a replacement fire extinguisher, free of charge. The recall began on April 11, 2018. Owners may contact DTNA customer service at 1-800-547-0712, or contact Kidde customer service toll-free at 1-855-262-3540, or online at www.kidde.com and click on "Product Safety Recall" for more information. DTNA's number for this recall is FL-759.

Daimler Trucks North America LLC (DTNA) is recalling certain 2002-2017 Freightliner Cascadia, Century Class, Columbia and Coronado trucks and Western Star 4700, 4900, 5700, 5900 and 6900 trucks. These vehicles are equipped with Kidde Plastic-Handle or Push Button 'Pindicator' Fire Extinguishers that may become clogged, preventing the extinguisher from discharging as expected or excessive force may be needed to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf

DTNA has notified owners, and dealers will inspect the steering arm and tie rod arm bolts for to make sure that they are properly tightened, installing new fasteners as necessary, free of charge. The recall began February 9, 2019. Owners may contact Daimler Trucks at 1-800-547-0712. DTNA's number for this recall is FL-802.

Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2019 Freightliner 114SD, 122SD, 108SD, Cascadia and Business class M2 trucks, Freightliner Custom Chassis XBS, XCL, XCM, MT45, MT55, S2G, S2RV, XCR and XCS custom chassis and Western Star 4700, 4900 and 5700 trucks equipped with Detroit Axle axles. The affected vehicles may have loose steering and tie rod arm bolts.

Dealers will replace the affected nylon fuel line with a steel fuel line, free of charge. The recall began November 21, 2018. Owners may contact DTNA customer service at 1-800-547-0712 or Cummins customer service at 1-800-286-6467. DTNA's number for this recall is FL789.

Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2019 Freightliner Cascadia, Coronado and 122SD, and Western Star 4900 trucks, equipped with Cummins ISX15 or X15 diesel engines. In certain driving conditions, such as on a long down-hill grade, the fuel line may burst if the fuel pump cooling circuit screen becomes restricted.

DTNA will notify owners, and dealers will add air reservoir capacity to the affected vehicles. Owner letters were mailed on November 29, 2021. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-815.

Daimler Trucks North America LLC (DTNA) is recalling certain 2004-2019 Freightliner 108SD, 114SD, 122SD, Cascadia, Columbia, Classic, FL80, FLD 120SD, Business Class M2, Western Star 4700, 4900, 6900, Sterling Acterra, L7500, LT7500, L8500, LT8500, L9500, and LT9500 vehicles. The vehicles may have an insufficient service brake air reservoir capacity. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems."

DTNA will notify owners, and dealers will replace the front left and right single brake modulator valves will be replaced and spacers added, free of charge. The recall began August 28, 2020. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-855.

Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2021 Freightliner Cascadia tractor trailers. The single brake modulator valve may be affected by chemical corrosion which can slow down the release timing and cause the brakes to pull to the affected side during automatic braking events.

DTNA will notify owners, and dealers will reprogram the ICU's to ensure a bulb check is performed each time the ignition is turned on, free of charge. Also, the sub-population with Tire Pressure Monitoring (TMPS) will also require replacement parts, free of charge. DTNA issued owners an interim notification on September 18, 2018. The recall began March 5, 2019. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-780.

Daimler Trucks North America, LLC (DTNA) is recalling certain 2017-2019 Freightliner Cascadia trucks. The Instrument Cluster Unit (ICU) may not perform the required bulb checks for the Anti-lock Brake System (ABS) or Electronic Stability Control (ESC) if the ignition is turned from on to off to on too quickly. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems," and 136, "Electronic Stability Control Systems on Heavy Vehicles."

DTNA will notify owners, and dealers will inspect the brake caliper mounting bolts and tighten them as necessary, free of charge. DTNA issued owners an interim notification on July 25, 2018. The recall began September 4, 2018. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-772.

Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2019 Freightliner M2 Business Class, 108SD, 114SD and Cascadia trucks, Western Star 4700, 4900, and 5700 trucks, FCCC S2C 106 Cab, S2G Cab, XBR, XBS, XCL, XCM, XCP, XCR, and XCS chassis equipped with air disc brakes. The brake caliper mounting bolts on these vehicles may be insufficiently tightened, allowing the bolts to loosen.

DTNA will notify owners and dealers will replace the brake light switch. The recall began January 18, 2019. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-799.

Daimler Trucks North America (DTNA) is recalling certain 2017-2018 Freightliner Cascadia vehicles. The brakes lights on these vehicles may remain activated after the brake pedal is released.

DTNA will notify owners, and dealers will inspect and reposition the reflective tape to ensure that it is completely visible, as necessary, free of charge. The recall began May 29, 2020. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL848.

Daimler Trucks North America LLC (DTNA) is recalling certain 2006-2020 Freightliner Columbia, 2006-2021 Freightliner Business Class M2, 2007-2020 Freightliner Coronado, 2014-2021 Freightliner 122 SD, 2007 Sterling A 9500, 2006 Freightliner Argosy, 2006-2007 Sterling AT9500, 2008-2021 Freightliner Cascadia, 2006-2008 Freightliner Classic, 2006-2011 Freightliner Century Class, 2006-2010 Freightliner FLD, and 2017 Western Star 5700 vehicles. The rear reflective tape may be partially covered by the mudflap hanger bracket, which may reduce the vehicle's visibility to other drivers on the road. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."

DTNA will notify owners, and dealers will replace the 3-pin brake pressure switch with a 2-pin brake pressure switch along with a jumper harness, free of charge. DTNA issued owners an interim notification on November 17, 2020. Owner notification letters were mailed on November 21, 2021. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-863.

Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2021 Cascadia P4 vehicles. The brake lights may remain illuminated after the brake pedal has been released.

DTNA will notify owners, and dealers will replace the front axle hubs, free of charge. The recall began during November 2016. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-718.

Daimler Trucks North America LLC (DTNA) is recalling certain model year 2014-2017 Freightliner M2 Business Class, 108 SD, 114 SD, Cascadia, Coronado, Western Star 4700, 4800, and 5700 XE trucks manufactured March 15, 2013, to July 29, 2016 and equipped with Conmet aluminum non-high capacity hubs. These vehicles specify a front axle weight limit that may be greater than that of the hub capacity. As a result, the hub may fail and the wheel may separate from the axle.

DTNA will notify the owners, and Detroit Axle dealers will replace the output shaft, free of charge. The recall began on July 7, 2017. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-738.

Daimler Trucks North America LLC (DTNA) is recalling certain 2017 Freightliner Cascadia and Western Star 5700 trucks built with NFD tandem rear axles. During the hardening process, the axle assembly output shaft may have been made brittle, possibly resulting in the output shaft fracturing while the vehicle is in use.

Goodyear will notify the owners of the affected Freightliner vehicles and Goodyear dealers will replace the affected tires, free of charge. The recall began on December 14, 2016. To find a Goodyear dealer, owners should contact Goodyear Consumer Relations at 1-800-592-3267. Consumers may also contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-728.

Daimler Trucks North America LLC (DTNA) is recalling certain model year 2017 Freightliner Cascadia, Business Class M2, and 122SD trucks manufactured January 24, 2016, to October 10, 2016 and equipped with Goodyear G399A LHS 295/75R22.5 Load Range G tires. The tires on the affected vehicles may have cured improperly, possibly resulting in a partial tread separation.

DTNA will notify owners, and dealers will repair the vehicles, free of charge. Daimler issued interim notifications to owners on January 22, 2018. The recall began on May 9, 2018. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-756.

Daimler Trucks North America, LLC (DTNA) is recalling certain 2008-2018 Freightliner Cascadia, Western Star 4700, 4900, 5700, and 6900 trucks. After hard brake applications, the brake light pressure switch may not activate the brake lights with a light application of the brake pedal.

Dealers will inspect and replace the front brake modulator valves, as necessary. Some vehicles will have a software update which will alert driver when a replacement is required. All repairs will be performed free of charge. Owner notification letters were mailed beginning October 16, 2023. DTNA's number for this recall is FL-958. This recall expands and replaces previous recall 20V-390. All vehicles previously repaired under recall 20V-390 will need to have the new remedy performed.

Daimler Trucks North America, LLC (DTNA) is recalling certain 2017-2023 Freightliner Cascadia, 2020-2022 Freightliner Business Class M2, and 2022 Freightliner 114SD, and 2020-2023 Western Star 49X, 2021-2023 Western Star 47X, and 2021-2022 Western Star 57X vehicles. The brake modulator valves on the front axle may corrode and cause the vehicle to pull to the affected side during an Adaptive Cruise Control (ACC) braking event.

Dealers will inspect and replace the front brake modulator valves, as necessary. Some vehicles will have a software update which will alert driver when a replacement is required. All repairs will be performed free of charge. Owner notification letters were mailed beginning October 13, 2023. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL966.

Daimler Trucks North America, LLC (DTNA) is recalling certain 2017-2023 Freightliner Cascadia, 2020-2023 Western Star 49X, 2021-2023 Western Star 47X, and 2022 Freightliner 114SD vehicles. The brake modulator valves on the front axle may corrode and cause the vehicle to pull to the affected side during braking initiated by Electronic Stability Control (ESC) or Roll Stability Control (RSC).